版权说明 操作指南
首页 > 成果 > 详情

铺层结构对三维中空夹层复合材料压缩性能的影响

认领
导出
Link by 中国知网学术期刊 Link by 维普学术期刊 Link by 万方学术期刊
反馈
分享
QQ微信 微博
成果类型:
期刊论文
论文标题(英文):
Influence of Layer Structure on Compressive Strength of 3D Hollow Sandwich Woven Composite
作者:
周正亮;张守玉;陈同海;戚洪强;赵大娟
作者机构:
[周正亮; 张守玉; 陈同海; 戚洪强; 赵大娟] 中材科技股份有限公司
语种:
中文
关键词:
三维中空夹层复合材料;树脂含量;铺层结构;织物厚度;压缩强度
关键词(英文):
3D hollow sandwich woven composite;resin content;layer structure;fabric thickness;compressive strength
期刊:
工程塑料应用
期刊(英文):
Engineering Plastics Application
ISSN:
1001-3539
年:
2017
卷:
25
期:
6
页码:
1243-1249
机构署名:
本校为其他机构
院系归属:
园艺园林学院
摘要:
采用手糊成型制备了双夹层三维中空夹层复合材料,重点研究了厚度为5 mm和8 mm的三维中空织物ZK5和ZK8铺层顺序对复合材料压缩强度的影响,并从树脂含量、织物厚度匹配性角度进行分析。结果表明,随树脂含量增加,三维中空夹层复合材料的压缩强度明显提高;双夹层三维中空夹层复合材料中,下层的树脂含量明显高于上层;ZK5和ZK8织物铺层顺序对双夹层中空复合材料的压缩强度影响较大,其中将ZK8置于ZK5下层时复合材料的压缩强度为ZK8置于ZK5上层时的1.7倍,即在三维中空夹层复合材料总厚度不变的情况下,将高厚度中空织物置于下层的结构明显优于将其置于上层的结构。通过这一概念可以在保证三维中空夹层复合...
摘要(英文):
3D hollow sandwich woven composite with double sandwiches was prepared by hand lay-up molding. The effects of layer structures of 3D hollow fabrics ZK5 (5 mm thickness) and ZK8 (8 mm thickness) on compressive strength of the composite were emphatically studied,which were also analyzed from the matching of the resin content and fabric thickness. The results show that the compression strength of the composite increases obviously with the increase of resin content. In the 3D sandwich woven composite with double sandwiches,the resin content in lower layer is higher than that of the upper layer. Th...

反馈

验证码:
看不清楚,换一个
确定
取消

成果认领

标题:
用户 作者 通讯作者
请选择
请选择
确定
取消

提示

该栏目需要登录且有访问权限才可以访问

如果您有访问权限,请直接 登录访问

如果您没有访问权限,请联系管理员申请开通

管理员联系邮箱:yun@hnwdkj.com