摘要:
A visible light self-powered photoelectrochemical (PEC) aptasensor based on silver chromate particles, graphitic carbon nitride nanosheets and graphene oxide sheets (Ag(2)CrO(4)/g-C(3)N(4)/GO) for the ultrasensitive detection of chloramphenicol (CAP) was reported in this work. g-C(3)N(4) was considered to be the fundamental photoelectric material because of its great oxidation ability of photogenerated hole as well as excellent biocompatibility and low toxicity. However, the narrow light absorption range and rapid carrier recombination rate limit the application of pure g-C(3)N(4). Herein, Ag(2)CrO(4) and GO as photosensitizer were introduced to improve the photoelectric properties of g-C(3)N(4). The photocurrent of the developed ternary composite was about 3 times higher than that of pristine g-C(3)N(4), which proves it can be used as a suitable photoelectric active material. Moreover, the mechanism of Z-scheme electron transfer path was proved by density functional theory (DFT) calculation. The fabricated PEC aptasensor exhibited high sensitivity toward CAP with a wide liner response of 0.5 pM to 50 nM and a detection limit of 0.29 pM. The specific recognition mechanism and excellent sensing performance indicated this aptasensor could serve as a useful tool for selective and ultrasensitive CAP detection in practical analysis.
摘要:
A hydroponic study was conducted to determine the effects of single and/or combined application of different doses (0, 5 and 10 mu M L-1) of abscisic acid (ABA) and 6-benzylaminopurine (BAP) on cobalt (Co) accumulation, morpho-physiological and antioxidative defense attributes of tomato (Solanum lycopersicum L.) exposed to severe Co stress (400 mu M L-1). The single Co treatment (T1), prominently decreased tomato growth, relative water contents, photosynthetic pigments (chlorophyll a and chlorophyll b), whereas enhanced oxidative stress and Co accumulation in shoot and root tissues. Nonetheless, the supplementation of ABA and 6-BAP via nutrient media significantly (P < 0.05) enhanced plant biomass, root morphology and chlorophyll contents of tomato, compared to only Co treatment (T1). Moreover, the oxidative stress indicators such as malondialdehyde, proline and H2O2 contents were ameliorated through activation of enzymatic antioxidant activities i.e. ascorbate peroxidase, superoxide dismutase, catalase, and peroxidase, in growth modulator treatments in comparison to T1. The Co uptake, translocation (TF) and bioaccumulation factor (BAF) by shoot and root tissues of tomato were significantly reduced under all the treatments than that of T1. The supply of 6-BAP alone or in combination with ABA at 10 mu M L-1 application (T7) rate was found the most effective to reduce Co accumulation in the roots and shoots by 48.4% and 70.2% respectively than T1 treatment. It can be concluded that two plant growth modulators could improve the stress tolerance by inhibition of Co uptake in tomato plants. (C) 2020 Elsevier Ltd. All rights reserved.
摘要:
Surface area and porosity are important physical properties of biochar, playing a crucial role in many biochar applications, such as wastewater treatment and soil remediation. The production of engineered biochar with highly porous structure and large surface area has received extensive attention. This paper comprehensively reviewed the effects of biomass and pyrolysis parameters on the surface area and porosity of biochar. The composition of biomass feedstock and pyrolysis temperature are the major influencing factors. It is suggested that the lignocellulosic biomass is an outstanding candidate, wood and woody biomass in particular. Besides, moderate temperatures (400-700 degrees C) are suitable for the development of the pore structure. Further improvement can be implemented by additional treatments. Activation is the most widely used and effective way to promote biochar surface area and porosity, especially the chemical activation. Enhancement can also be achieved by using other treatment methods, such as carbonaceous materials coating, ball milling, and templating. Future research should focus on upgrading or developing treatment technology to achieve enhanced functionality and porous structure of biochar simultaneously. (C) 2020 Elsevier B.V. All rights reserved.
摘要:
The heavy metal pollution is a worldwide problem and has received a serious concern for the ecosystem and human health. In the last decade, remediation of the agricultural polluted soil has attracted great attention. Phytoremediation is one of the technologies that effectively alleviate heavy metal toxicity, however, this technique is limited to many factors contributing to low plant growth rate and nature of metal toxicities. Arbuscular mycorrhizal fungi (AMF) assisted alleviation of heavy metal phytotoxicity is a cost-effective and environment-friendly strategy. AMF have a symbiotic relationship with the host plant. The bidirectional exchange of resources is a hallmark and also a functional necessity in mycorrhizal symbiosis. During the last few years, a significant progress in both physiological and molecular mechanisms regarding roles of AMF in the alleviation of heavy metals (HMs) toxicities in plants, acquisition of nutrients, and improving plant performance under toxic conditions of HMs has been well studied. This review summarized the current knowledge regarding AMF assisted remediation of heavy metals and some of the strategies used by mycorrhizal fungi to cope with stressful environments. Moreover, this review provides the information of both molecular and physiological responses of mycorrhizal plants as well as AMF to heavy metal stress which could be helpful for exploring new insight into the mechanisms of HMs remediation by utilizing AMF.
摘要:
An effective adsorbent towards fluoroquinolone antibiotics was synthesized via a facile two-step approach, the co-precipitation of Fe, Mn with vinasse wastes and then pyrolysis under controlled conditions which denoted as FMB. Its adsorption behavior was examined based on a batch adsorption experiment of fluoroquinolone antibiotics pefloxacin (PEF) and ciprofloxacin (CIP). Experimental factors, such as pH, adsorbent dose, ionic strength, contact time and temperature have done a great deal to influence the adsorption of PEF and CIP. The FMB demonstrated excellent performance in reusability tests towards to both PEF and CIP, which showed that the recycling efficiency of PEF and CIP could remain similar to 55% and similar to 80% after five recycle cycles, respectively. The dominated adsorption mechanisms included pore filling effect, pi-pi stacking interaction, pi-pi EDA, hydrogen bonding and hydrophobicity. Overall, this work presented FMB was recognized as an effective, environmental-friendly and magnetically separable adsorbent for alleviating fluoroquinolone antibiotics contamination from water. (C) 2019 Elsevier B.V. All rights reserved.
关键词:
Mining and manufacturing;Rock weathering;Fertilizer and pesticide use;Principal component analysis;Mixed metal pollution;Surface water pollution
摘要:
This study collected past sampling data on total concentrations of 12 heavy metals (Cd, Pb, Cr, Hg, Zn, Cu, Ni, Al, Fe, Mn, As, and Co) in surface water bodies, i.e., 168 rivers and 71 lakes, from 1972 to 2017. The intent was to investigate the levels and sources of heavy metal pollution across five decades and five continents. Mean heavy metal concentrations in global river and lake water, and the number of heavy metals with concentrations greater than the published threshold limits as per the standards of both the World Health Organization (WHO) and the United States Environmental Protection Agency (USEPA) were generally lower in the 1970s and 1980s than in the 1990s, 2000s, and 2010s. Over time, heavy metal pollution in surface water has changed from single metal pollution to mixed metal pollution. Heavy metal concentrations in water, and the number of heavy metals with concentrations above the threshold limits for both WHO and USEPA standards were lower in the developed countries of Europe and North America, and higher in the developing countries of Africa, Asia, and South America. Over time, the main sources of metal pollution have changed from mining and manufacturing to rock weathering and waste discharge. The main metal sources differed across the five continents, with fertilizer and pesticide use, along with rock weathering, being dominant in Africa. Mining and manufacturing, along with rock weathering, were dominant in Asia and Europe. Mining and manufacturing, along with fertilizer and pesticide use, were dominant sources in North America, while four sources (mining and manufacturing, fertilizer and pesticide use, rock weathering, and waste discharge) were responsible for the majority of heavy metal pollution in the river and lake water bodies of South America. Additionally, implementing rigorous standards on metal emissions and recycling metals from wastewater are effective for controlling heavy metal source pollution. (C) 2020 The Authors. Published by Elsevier B.V.
摘要:
The application of pesticides reduces the loss of crops while simultaneously increasing crop productivity. However, the frequent use of pesticides can cause serious environmental problems due to their high accumulative and persistent nature. Recently, microalgae technology has received considerable success in the efficient treatment of pesticides pollution. In this review, the metabolic mechanisms responsible for the removal of pesticides are summarized based on previous studies. Different methods used to enhance the ability of microalgae to remove pesticides are critically evaluated. The recycling of microalgae biomass after wastewater treatment for biochar preparation and biodiesel production using the biorefinery approach is also introduced. Furthermore, we present potential future research directions to highlight the prospects of microalgae research in the removal of pesticides along with the production of value-added products.
摘要:
Biochar and compost have been widely used for pollution remediation of heavy metals in soil. However, little research was conducted to explore the efficiency of biochar, compost and their combination to reduce heavy metals availability, and the effects of their additive on soil biological properties are often neglected. Therefore, this study investigated the effects of biochar, compost and their combination on availability of heavy metals, physicochemical features and enzyme activities in soil. Results showed that adding amendments to polluted soil significantly altered soil properties. Compared to the separate addition of biochar or compost, their combined application was more effective to improve soil pH, organic matter (OM), organic carbon (TOC) and available potassium (AK). All amendments significantly decreased the availability of Cd and Zn, but slightly activated As and Cu. In addition, soil enzyme activities were activated by compost and inhibited by biochar, but exhibited highly variable responses to their combinations. Pearson correlation analysis indicated that electrical conductivity (EC) and AK were the most important environmental factors affecting metal availability and soil enzyme activities including dehydrogenase, catalase, beta-glucosidase, urease, acid and alkaline phosphatase, arylsulfatase except for protease and invertase. Availability of As, Cu, Cd and Zn affected dehydrogenase, catalase and urease activities. These results indicated that biochar, compost and their combination have significant effects on physicochemical features, metals availability and enzyme activities in heavy metal-polluted soil.
摘要:
Flax (Linum usitatissimum L.) is one of the oldest predominant industrial crops grown for seed, oil and fiber. The present study was executed to evaluate the morpho-physiological traits, biochemical responses, gas exchange parameters and phytoextraction potential of flax raised in differentially copper (Cu) spiked soil viz (0, 200, 400 and 600 mg Cu kg(-1) soil) under greenhouse pot experiment. The results revealed that flax plants were able to grow up to 400 mg kg(-1) Cu level without showing significant growth inhabitation while, further inference of Cu (600 mg kg(-1)) in the soil prominently inhibited flax growth and biomass accumulation. Compared to the control, contents of proline and malondialdehyde (MDA) were increased by 160.0% and 754.1% accordingly, at 600 mg Cu kg(-1) soil level. The Cu-induced oxidative stress was minimized by the enhanced activities of superoxide dismutase (SOD) by 189.2% and guaiacol peroxidase (POD) by 300.8% in the leaves of flax at 600 mg Cu kg(-1) soil level, compared to the untreated control. The plant Cu concentration was determined at 35, 70, 105 and 140 days after sowing (DAS) and results depicted that 16.9 times higher Cu concentration was accumulated in flax roots while little (14.9 times) was transported to the shoots at early stage of growth, i.e. 35 DAS. While at 140 DAS, Cu was highly (21.7 times) transported to the shoots while, only 12.3 times Cu was accumulated in the roots at 600 mg Cu kg(-1) soil level, compared to control. Meanwhile, Cu uptake by flax was boosted up to 253 mg kg(-1) from the soil and thereby extracted 43%, 39% and 41% of Cu at 200, 400 and 600 mg Cu kg(-1) soil level, compared to initial Cu concentration. Therefore, study concluded that flax has a great potential to accumulate high concentration of Cu in its shoots and can be utilized as phytoremediation material when grown in Cu contaminated soils.
摘要:
The rapid development of aquaculture results in the increased concentrations and kinds of antibiotics in water environment, and the sharply growing antibiotic contamination has caused increasing concerns. Herein, an innovative sulfamethazine (SMT) removal approach was developed by activation of persulfate (PS) using biochar-based materials prepared by co-precipitation and pyrolysis: Fe-Mg oxide/biochar (FeMgO/BC). Experiments on the activation of PS by FeMgO/BC under different factors were carried out. The involved mechanism and degradation pathway were also studied. Notably, the SMT removal rate reached 99 % under the optimum reaction condition, while the TOC removal efficiency reached 77.9 %. PS was activated by FeMgO/BC and the dominated active radical was SO(4•)(-). Fe(2+) from FeMgO and the hydroxyl and carboxyl groups on the surface of biochar contributed to the production of SO(4•)(-). The dehydrogenation, bond cracking and unsaturated bond addition process occurred in the degradation of SMT. Furthermore, FeMgO/BC exhibits excellent reusability and stability. Considering the outstanding actual water application performances and the weak biotoxicity, FeMgO/BC shows a promising potential in the removal of antibiotics under actual water conditions.
摘要:
With the development of the removal of organic pollutants in the soil and water environment, antibiotics have been considered as emerging pollutants and received considerable attention among the scientific community. Thus, there is a need for an effective, economical, fast, operational feasible and environmental-friendly technology to remove antibiotics. Adsorption technology would be one of the most promising option on the basis that it best meets the criteria we set out above. From the most primitive activated carbon to the most innovative modified biochar, carbon-based materials have played a significant role in the adsorption process of antibiotics all the time. This paper reviews the adsorption behavior of some representative antibiotics (e.g., chloramphenicols, sulfonamides, tetracyclines, flouroquinolones) over various carbonaceous materials (i.e., activated carbon, carbon nanotubes, graphene, and biochar). Nevertheless, in addition to the structural characteristics and adsorption capacities of carbon-based materials, a special emphasis was placed on the underlying adsorption mechanisms and roles of different influencing factors in the adsorption process. Moreover, the knowledge gaps and research challenges have been highlighted, including design and optimization of the carbonaceous materials for antibiotics adsorption.
作者:
Chen, Liang;Wang, Lei*;Cho, Dong-Wan;Tsang, Daniel C. W.*;Tong, Lizhi;...
期刊:
Journal of Cleaner Production,2019年222:335-343 ISSN:0959-6526
通讯作者:
Tsang, Daniel C. W.;Wang, Lei
作者机构:
[Chen, Liang; Poon, Chi Sun; Tsang, Daniel C. W.; Zhou, Yaoyu; Wang, Lei; Cho, Dong-Wan] Hong Kong Polytech Univ, Dept Civil & Environm Engn, Hung Hom, Kowloon, Hong Kong, Peoples R China.;[Wang, Lei] Univ Sheffield, Dept Mat Sci & Engn, Sir Robert Hadfield Bldg,Mappin St, Sheffield S1 3JD, S Yorkshire, England.;[Cho, Dong-Wan] Korea Inst Geosci & Mineral Resources, Geol Environm Div, Gwahak Ro 124, Daejeon 34132, South Korea.;[Tong, Lizhi; Hu, Qing] Southern Univ Sci & Technol, Sch Environm Sci & Engn, Shenzhen 518055, Guangdong, Peoples R China.;[Zhou, Yaoyu] Hunan Agr Univ, Coll Resources & Environm, Changsha 410128, Hunan, Peoples R China.
通讯机构:
[Tsang, Daniel C. W.] H;[Wang, Lei] U;Hong Kong Polytech Univ, Dept Civil & Environm Engn, Hung Hom, Kowloon, Hong Kong, Peoples R China.;Univ Sheffield, Dept Mat Sci & Engn, Sir Robert Hadfield Bldg,Mappin St, Sheffield S1 3JD, S Yorkshire, England.
摘要:
Municipal solid waste incinerator fly ash (IFA) is categorized as a hazardous waste, which requires proper treatment prior to landfilling due to its high concentrations of toxic elements. This study developed an innovative and cleaner method for stabilization/solidification (S/S) of IFA by the incorporation of supplementary cementitious materials (SCMs) and green stabilizers. Quantitative X-ray diffraction and thermogravimetric analyses indicated that toxic elements in IFA inhibited the cement hydration. Therefore, the single use of cement (10 wt%) was not efficient for the immobilization of toxic elements, especially for Pb. The incorporation of SCMs (20 wt% of binder) such as silica fume facilitated the formation of additional cement hydrates and reduced Pb leachability by 36.3%. The addition of green stabilizers such as potassium dihydrogen phosphate (KDP) and wood waste-derived biochar also improved the immobilization of toxic elements. KDP directly combined with Pb2+ to form a precipitate of Pb-3(PO4)(2), whereas biochar promoted the generation of cement hydrates for S/S via the effect of internal curing. The incorporation of silica fume (40 wt%) in the binder was the most effective. Overall, this study demonstrated that the selected green binders can serve as low-carbon and high-efficient material for S/S of hazardous ash residue such as IFA. (C) 2019 Elsevier Ltd. All rights reserved.
摘要:
In this study, the oxidized multiwalled carbon nanotube (O-MWCNTs) was obtained by a simple method, and investigated by various techniques (SEM, TEM, FT-IR, XPS and zeta potential) for the removal of pefloxacin and Cu (II). The mutual effects of their adsorption onto O-MWCNTs were comprehensively clarified with sole and binary systems with adsorption kinetics, sorption thermodynamic and sorption isotherm models. The results indicated that there are site enhancement and competition of pefloxacin and Cu(II) on O-MWCNTs. According to mechanism investigation on the adsorption of pefloxacin and Cu(II) by XPS analysis, pH impact study, electrostatic interaction and pi-pi interactions, the low concentration of Cu(II)/pefloxacin could act as a bridge between pefloxacin/Cu(II) and O-MWCNTs, which significantly enhances the adsorption of pefloxacin/Cu(II). This study provided effective method and valuable reference for the elimination of pefloxacin/Cu(II) from aquatic environments. (C) 2018 Elsevier B.V. All rights reserved.
关键词:
Heavy metal;Microbial community;Microbiological indicator;Soil diagnosis
摘要:
Heavy metal contamination of soil has become a serious global issue because of their persistence in the environment and the non-biodegradable nature leading to their accumulation to toxic levels. In order to achieve early warning and prevent soil quality from deteriorating, it is necessary to select suitable indices to diagnose heavy metal pollution. Microbiological indices for monitoring soil pollution by heavy metals are gaining attention. However, the related researches are scattered, and critical review is imperative. This review is mainly to provide readers with an in-depth understanding of the merits and limitations of microbiological indices for heavy metals contaminated and remediated soils. Microbiological indicators include microbial abundance, community diversity and structure, functional activity. The changes of different microbiological indices and the mechanism of microbial response to heavy metal stress in soils are comprehensively summarized. Furthermore, research gaps and future directions of the microbial ecotoxicological diagnosis of soil contamination by heavy metals are also proposed and discussed.
作者:
Wan, Zhonghao;Sun, Yuqing;Tsang, Daniel C. W.*;Yu, Iris K. M.;Fan, Jiajun;...
期刊:
Green Chemistry,2019年21(17):4800-4814 ISSN:1463-9262
通讯作者:
Tsang, Daniel C. W.
作者机构:
[Sun, Yuqing; Wan, Zhonghao; Tsang, Daniel C. W.; Zhou, Yaoyu; Yu, Iris K. M.] Hong Kong Polytech Univ, Dept Civil & Environm Engn, Hong Kong, Peoples R China.;[Fan, Jiajun; Clark, James H.; Yu, Iris K. M.] Univ York, Dept Chem, Green Chem Ctr Excellence, York YO10 5DD, N Yorkshire, England.;[Zhou, Yaoyu] Hunan Agr Univ, Coll Resourres & Environm, Hunan Int Sci & Technol Cooperat Base Agr Typ Pol, Changsha 410128, Hunan, Peoples R China.;[Cao, Xinde] Shanghai Jiao Tong Univ, Sch Environm Sci & Engn, Shanghai 200240, Peoples R China.;[Gao, Bin] Univ Florida, Dept Agr & Biol Engn, Gainesville, FL 32611 USA.
通讯机构:
[Tsang, Daniel C. W.] H;Hong Kong Polytech Univ, Dept Civil & Environm Engn, Hong Kong, Peoples R China.
摘要:
We have developed a sustainable graphitic biochar for environmental remediation from wood waste through catalytic pyrolysis under the synergistic effects between CO2 and Cu heteroatoms, which for the first time are found to significantly enhance the oxygen functionalities, defective sites, and highly ordered sp2-hybridized carbon matrix. The copper-doped graphitic biochar (Cu-GBCs) were further characterized by XRD, FTIR, Raman, XPS, etc., revealing that the modified specific surface area, pore structure, graphitization, and active sites (i.e., defective sites and ketonic group) on the Cu-GBCs corresponded to the synergistic Cu species loading and Cu-induced carbon-matrix reformation under CO2 environment during pyrolysis. The catalytic ability of the Cu-GBCs was evaluated using the ubiquitous peroxydisulfate (PDS) activation system for the removal of various organic contaminants (i.e., Rhodamine B, phenol, bisphenol A, and 4-chlorophenol), and gave the highest degradation rate of 0.03122 min-1 in comparison with those of pristine GBCs and N2-pyrolyzed Cu-GBCs ranging from 0.0056 to 0.0094 min-1. The synergistic effects were attributed to the encapsulated Cu heteroatoms, evolved ketonic groups, and abundant unconfined π electrons within the carbon lattice. According to scavenger experiments, ESR analysis, and the two-chamber experiments, selective and sustainable non-radical pathways (i.e., singlet oxygenation and electron transfer) mediated by Cu-induced metastable surface complex were achieved in the Cu-GBC/PDS system. This study offers the first insights into the efficacy, sustainability, and mechanistic roles of Cu-GBCs as an emerging carbon-supported catalyst, and facilitates the development of biochar-based materials as sustainable catalysts in green environmental remediation.
摘要:
In the last decades, agricultural soil pollution by heavy metals has been extensively investigated in China. However, nearly all studies were field monitoring in small regions and/or with limited samples, which may not represent soil pollution situation at the national scale. In this paper, attempt was made to provide a comprehensive report about heavy metal pollution in China based on meta-analysis of reviewed data. Given the characteristics of field monitoring studies, the weighted mean values based on "sampling number". "study area", and "standard deviation" were calculated to represent national mean values. In addition, subgroup analysis and cumulative meta-analysis were applied to explore the spatial and temporal variations as well as the influence of cropping systems. 336 articles published from 2005 to 2017 were reviewed in the analysis. Eight heavy metals (cadmium (Cd), chromium (Cr), mercury (Hg), lead (Pb), arsenic (As), copper (Cu), zinc (Zn) and nickel (Ni)) were analyzed. The contents of Cd and Hg were increased compared to background values, while, other six elements showed no significant accumulation. Little pollution was found in normal farmland, which was far from obvious anthropogenic emissions, but Cd and Hg in mining & smelting areas and industrial areas continued to accumulate significantly. Moreover, the accumulation had slowed down or decreased since 2012, which might be due to reduced use of coals, non-ferrous metals and agro-chemicals. Heavy metal contents were generally higher in southwest and south coastal areas but lower in northwest regions, whereas vegetable and paddy fields had higher concentrations than upland and other land use. This study provides information on soil pollution caused by heavy metals and its affected regions and cropping systems on a national scale. It can be useful for developing heavy metal pollution control and management strategies in China. (C) 2018 Elsevier B.V. All rights reserved.